Pressure Washing Price Calculator
Enter the square footage for each surface and adjust the rates to match your market.
Quoting this for a customer?
YardDraft turns your job details into a friendly, professional quote for pressure washing, lawn care, landscaping and snow removal. Your first quote each month is free.
Try YardDraftHow pressure washing is priced
Most pressure washing companies price by the square foot of the surface being cleaned, with a minimum charge so that small jobs still cover travel, setup and equipment costs. Typical starting points are about 15 to 35 cents per square foot for flat concrete like driveways and sidewalks, and a bit more for siding, decks, and fences, which take longer to clean carefully.
The rates in the boxes above are examples. Change them to match your market, your equipment, and your costs. Prices vary a lot by region, so look at what two or three local companies charge before you settle on yours.
What changes the price
Heavy staining, mold, rust, or oil adds time. Hard-to-reach areas, multiple stories, and surfaces that need a softer wash (vinyl siding, painted wood, older roofs) take more care. Charging extra for sealing, stain treatment, or water hookup problems keeps the base price simple.
Check the hourly math
Estimate how long the job will take and divide your price by those hours. If it comes out below your target hourly pay after fuel, chemicals, and equipment wear, raise the price or the minimum. Enter a target hourly rate above to see how many hours of work the price covers.
Estimates only. Rates are examples, not market data.
Worked example
Suppose a customer wants a 600 square foot driveway at $0.25 per square foot ($150), a 300 square foot patio at $0.30 ($90), and 200 square feet of fence at $0.30 ($60). The total is $300. If the job takes three hours on site, that works out to $100 an hour before costs. If you also spend an hour driving and setting up, it is closer to $75 an hour. This is why checking the hourly math matters.
What to include in a written quote
- The surfaces to be cleaned, with the measurements you used
- The price for each one, and the total
- What is not included, such as sealing, rust removal or second coats
- Who provides the water and power
- When payment is due and how long the quote is valid
A short, clear quote prevents arguments later, and customers tend to trust a quote with details more than a single number.
Protecting the surface
Too much pressure or the wrong nozzle can etch concrete, gouge wood and force water behind siding. Softer surfaces need lower pressure and wider spray patterns, and some jobs use a low-pressure soft wash with a cleaning solution instead of high pressure. Test a small, hidden spot first, and keep the nozzle moving.
Common reasons a job takes longer
- Heavy mold, algae or oil stains that need pre-treatment
- Surfaces that are far from a water source or hard to reach
- Furniture, plants and vehicles that have to be moved first
- Multi-story siding that needs ladders or extension wands
Frequently asked questions
Should I charge by the square foot or by the job?
Measure by the square foot, because it makes your pricing consistent. Then quote the customer a single price per job.
Do I need insurance or a license?
Requirements vary by state and city, and general liability insurance is common in the trade. Check with your local business office.
How much does a pressure washer rental cost compared with hiring?
Renting is cheaper for a small job, but a professional brings experience, stronger equipment and insurance. Customers weigh their time against that difference.
Estimates only. Rates are examples, not market data.